home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BlastDOS
/
[DOS Application] Microsoft - LAN Manager 2.2c - Installation Disks.zip
/
NWSETUP.MSG
(
.txt
)
< prev
next >
Wrap
OS/2 Message File
|
1994-09-02
|
19KB
|
489 lines
MKMSGF
)b*N+P,
;";%;(;+;.;1;4;7;:;=;@;C;F;I;L;O;R;U;X;[;^;a;d;g;j;m;p;s;v;y;|;
<!<$<'<*<-<0<3<6<9<<<?<B<E<H<K<N<Q<T<W<Z<]<`<c<f<i<l<o<r<u<x<{<~<
= =#=&=)=,=/=2=5=8=;=>=A=D=G=J=M=P=S=V=Y=\=_=b=e=h=k=n=q=t=w=z=}=
>">%>(>+>.>1>4>7>:>=>@>C>F>I>L>O>R>U>X>[>^>a>d>g>j>m>p>s>v>y>|>
?!?$?'?*?-?0?3?6?9?<???B?E?H?K?N?Q?T?W?Z?]?`?c?f?i?l?o?r?u?x?{?~?
B+DWD
KI Error: Error reading message file, NWSETUP.MSG.
I Error: Insufficient memory.
I Error: NetWare Connectivity Setup initialization failure.
I Error: Background window refresh failure.
I NetWare Connectivity Setup Program
I Already Installed \
@0,1,"
The NetWare Connectivity Setup program has detected
that NetWare Connectivity is already installed on your
computer.
To reinstall NetWare Connectivity, choose <OK>.
If you don't want to reinstall, choose <Exit>.
@ OK \
@ Exit \
@ Help \
I HELP \
@0,1,"Already Installed
------------------------------------------------------------
The Setup program has detected that you already have NetWare
Connectivity installed on your computer (this was determined
by the presence of IPX.COM in your LAN Manager directory
tree.)
If you want to reinstall NetWare Connectivity, choose <OK>.
If you don't want to reinstall it, choose <Cancel>.
@ OK \
I NetWare Connectivity Installation \
@0,1,"
The NetWare Connectivity feature of LAN Manager enables
an MS-DOS workstation to access both LAN Manager servers
and Novell NetWare servers simultaneously, using only a
single network adapter card. NetWare Connectivity also
includes full support for Microsoft Windows (version 3.0
and later.)
(Note that after you install NetWare Connectivity, you
will be able to assign drive letters Q: through Z: only to
NetWare directories, not to LAN Manager directories. For more
information, see your NetWare Connectivity documentation.)
To install NetWare Connectivity, choose <OK>.
@ OK \
@ Exit \
@ Help \
I HELP \
@0,1,"NetWare Connectivity Installation
------------------------------------------------------------
To install NetWare Connectivity, choose <OK>.
To exit Setup without installing, choose <Cancel>.
@ OK \
I LAN Manager Path Needed \
@0,1,"
Setup cannot find the path to your LAN Manager directory.
Please type the full path below (including drive letter)
and choose <OK>.
@ OK \
@ Exit \
@ Help \
@5,1,"LAN Manager Path: [ ]",0,20,"C:\LANMAN.DOS",20
I HELP \
@0,1,"LAN Manager Path Needed
------------------------------------------------------------
Type the path to the computer's LAN Manager directory, and
then choose <OK>. When you type the path, be sure to include
the drive letter.
Examples:
C:\LANMAN.DOS
D:\NETWORK
@ OK \
I NetWare Windows Driver Installation \
@0,1,"
For NetWare Connectivity to fully support Microsoft Windows,
Windows network drivers for both LAN Manager and NetWare must
be installed on the computer. Setup has detected that the NetWare
drivers are not installed. In order to install these drivers, this
program will start the Windows Setup program.
For information on what you need to to while in Windows Setup,
choose <Help>.
When ready to begin Windows Setup, choose <OK>.
If you don't want to install full Windows support for
NetWare Connectivity, choose <Cancel>.
@ OK \
@ Cancel \
@ Help \
I HELP \
@0,1,"NetWare Windows Driver Installation
------------------------------------------------------------
(Click scroll bar or press PageDown to see more text.)
If you want to install the Windows drivers for NetWare,
choose <OK>. The Windows Setup program will start. While
you are in the Windows Setup program, do the following:
1) Use the Up Arrow key to select the `Network:' line, then
press ENTER.
A list of networks appears.
2) Select `Novell NetWare' from the list and press ENTER.
3) Press ENTER to confirm your configuration. You will be
prompted to insert one or more disks, and Windows Setup
will copy the correct drivers to your computer.
When Windows Setup is finished, you'll be returned to NetWare
Connectivity Setup.
@ OK \
I LAN Manager Windows Driver Installation \
@0,1,"
For NetWare Connectivity to fully support Microsoft Windows,
Windows network drivers for both LAN Manager and NetWare must
be installed on the computer. Setup has detected that the
LAN Manager drivers are not installed. In order to install these
drivers, this program will start the Windows Setup program.
For information on what you need to to while in Windows Setup,
choose <Help>.
When ready to begin Windows Setup, choose <OK>.
If you don't want to install full Windows support for
NetWare Connectivity, choose <Cancel>.
@ OK \
@ Cancel \
@ Help \
I HELP \
@0,1,"LAN Manager Windows Driver Installation
------------------------------------------------------------
(Click scroll bar or press PageDown to see more text.)
If you want to install the Windows drivers for LAN Manager,
choose <OK>. The Windows Setup program will start. While
you are in the Windows Setup program, do the following:
1) Use the Up Arrow key to select the `Network:' line, then
press ENTER.
A list of networks appears.
2) Select the correct network from the list and press ENTER.
The correct network depends on your version of LAN Manager
and whether the computer runs LAN Manager Enhanced or
LAN Manager Basic.
3) Press ENTER to confirm your configuration. You will be
prompted to insert one or more disks, and Windows Setup
will copy the correct drivers to your computer.
When Windows Setup is finished, you'll be returned to NetWare
Connectivity Setup.
@ OK \
I Provide Disk \
@0,1,"
NetWare Connectivity requires one of the files NET%1.COM or NETX.COM
from the NetWare install disks to be copied into the LAN Manager
installation. This file can be found on one of the following disks:
WSGEN, SHGEN-1, or SHGEN-2
Please insert the disk containing the file into drive A:, or type
the full path (including drive letter) of a directory containing
the file.
Drive letter or full path:
@ OK \
@ Exit \
@ Help \
@11,28,"[ ]",0,1,"A:",30
I HELP \
@0,1,"Provide Disk
------------------------------------------------------------
Put the disk containing the NetWare shell program (either
NET3.COM, NET4.COM, NET5.COM, or NETX.COM) into the floppy
drive and choose <OK>. If this file can be found on a
network directory, you can type the path to that directory
instead. (For example, N:\NWFILES.)
To save time, before you install NetWare Connectivity on
another workstation you might want to copy the NetWare shell
program to the disk you use for installation. This way, the
NetWare Connectivity Setup program won't have to ask for
this disk. If you do this, copy the NetWare shell program
to the same directory that the NWSETUP.EXE program is in.
@ OK \
I Information \
@0,1,"
Linking IPX.COM.
Please wait...
I Information \
@0,1,"
Saving Configuration.
Please wait...
I NetWare File(s) Not Found \
@0,1,"
One or more of the following NetWare files could not be
found on the NetWare install disks:
NLINK.EXE
IPX.OBJ
Therefore, IPX.COM cannot be generated.
When you choose <OK>, the NetWare Connectivity Setup program
will end. You should then try copying these files to the directory
containing the NetWare Connectivity Setup program (NWSETUP.EXE),
and then run NWSETUP again.
@ OK \
I Warning \
@0,1,"
The LAN Manager path you specified is not valid.
Choose <OK> to continue with the installation.
@ OK \
I Installation Complete \
@0,1,"
NetWare Connectivity has been successfully installed.
When you choose <OK>, the NetWare Connectivity Setup program
ends. You must then use the LAN Manager Setup program to bind
the IPX protocol to a network adapter card driver.
If you will install NetWare Connectivity on more workstations,
you can save time by first copying the IPX.COM you generated
on this workstation to the disk you use for installation.
Copy it to the same directory that contains NWSETUP.EXE.
For more information, see the NetWare Connectivity
Administrator's Guide.
@ OK \
I Installation Complete \
@0,1,"
NetWare Connectivity has been successfully installed.
To make the changes to y